SHUTTLE BOX

Panlab Shuttle Boxes LE916 (Rats) and LE918 (Mice) provide the ideal environment to carry out conditioned reflexes (Active and Passive Avoidance) in learning and memory studies.

Basically, the Panlab Shuttle box (LE916-918) consists of two equally sized compartments with two independent grid floors. A frontal door, in addition to the top ones, allows an easy access inside the box. The cage contains a general sound generator and a visual stimulus (light) for each compartment.

The Animal is detected by two Weight Transducers located above the static grids, avoiding the problems inherent to photoelectrical or grid tilting systems (high speeds of displacements in mice, tail detection in rats).

Panlab Shuttle box is thought to be easily set up and dismantled. Therefore, reconverting it to traditional Passive Box is quite straightforward by adding a sliding door (LE916D for mice or LE918D for rats). Furthermore, it is possible to set up different wall shapes or colours in order to further condition the subject of study either visually or spatially.

The shuttle boxes can be controlled by Programmer LE 2708 or Software (ShutAvoid). SeDaCom software is provided for transferring data from the programmer to a PC through a RS232 port (free of charge). It is not necessary the interface neither the use of board installed into the PC. The link is carried out by one only cable from one Box to the other. The first Box is connected to PC or Laptop by the port RS 232 or USB.
The second option is suitable for controlling a number of boxes simultaneously.

• Latency to entrance into the black compartment (passive avoidance)
• Number and latency of conditioned responses (active avoidance)
• Number and latency of unconditioned responses (active avoidance)
• Number and latency of null responses (active avoidance)
• Number and latency of none responses (active avoidance)
• Number of compartment changes during the intertrial intervals (active avoidance)
• Latency mean and accumulated responses sorted by interval of time

• Highly sensitive weight transducer system for accurate animal detection
• Easy to set up different wall shapes and colours
• Optional guillotine door
• Compartments with independent grid floor
• Frontal and top doors for an easy access inside the box
• Up to 8 Active Boxes can be controlled at once from a PC
• Neither PC interface nor PC cards are required.
• Safety System which guarantees that the shock intensity received by the animal is always the same value independently of the grid bars treaded.

• Active Box (Shuttle Box)
• Control Unit with RS-232 communication's port
• SeDaCom Software
• Cables, connectors
• Instructions manual
• 2 years warranty

• Motorized door to convert Active Box into Passive Box
• Sound Attenuating Box
• LE2708 Avoidance Programmer including shocker
• ShutAvoid Software to control up to 8 Active or Passive Boxes
• LE10026 Shocker unit with scrambler (0-2mA output)